Products

Home page

Products

Fluoropolymer Liquid/Liquid Coalescer (Retrofit for Pall PhaseSep L/L Coalescer LCS4H1AH)

对比

Number:

04-05

Fluoropolymer Liquid/Liquid Coalescer (Retrofit for Pall PhaseSep L/L Coalescer LCS4H1AH)

Model Number:

HLLIF40SFV

The HLLIF40SFV series Fluoropolymer Liquid/Liquid Coalescer uses fluoropolymer as the coalescing material, which can reduce the free water content in the organic phase to less than 15 ppmv and the free organic content in the aqueous phase to less than 20 ppmw. Typically, it is recommended to add a pre-filter upstream of the coalescer to remove particles from the fluid, protecting the coalescer for long-term operation. The removal rating of the pre-filter is recommended to be 10 μm or less. This design ensures efficient and reliable liquid/liquid separation, meeting the stringent requirements of the oil, gas, and chemical industries. The HLLIF40SFV series fluoropolymer liquid/liquid coalescer can directly replace the Pall LCS4H1AH series (PhaseSep L/L Coalescer).

Quantity

Stock surplus

加入购物车

立即购买

Classification:

Coalescers & Separators

Request for Quote

隐藏域元素占位

Overview

Features and Advantages

Specifications

Filter Cartridge Selection Chart

Performance

Features and Advantages

Uses fluoropolymer as the coalescing material

Efficient coalescing separation performance

Can operate for long periods

A replacement for Pall's LCS4H1AH series (PhaseSep L/L Coalescer).

Specifications

Material Structure

Coalescing Layer Material: Fluoropolymer

Drainage Layer Material: Fluoropolymer

Core: Stainless steel

End Caps: Stainless steel

Working Characteristics

Maximum Operating Temperature: 149 ℃

Maximum Operating Pressure Difference: 0.35MPa/21 ℃

Recommend Replacement Pressure Difference: 0.1MPa

Filter Cartridge Selection Chart

Coalescing Layer Material	Drainage Layer Material	Core	End Caps	Gasket/O-ring Material	Length	Diameter	Connector
Fluoropolymer	Fluoropolymer	Stainless Steel	Stainless Steel	V: fluorine rubber	20 in, 40 in	95mm	Pall