09
2021
-
11
Titanium powder sintered filter element and filter material characteristics
Author:
Author
Titanium powder sintered filter material (including tube and plate) is a micro filter element made of titanium Ti and stainless steel 304.304L.316.316L powder as raw materials, which is screened, formed and sintered. High filtration accuracy, good air permeability, high mechanical strength, high material utilization, suitable for high working temperature and thermal shock resistance.
Titanium powder sintered filter material (including tube and plate) is a micro filter element made of titanium Ti and stainless steel 304.304L.316.316L powder as raw materials, which is screened, formed and sintered. High filtration accuracy, good air permeability, high mechanical strength, high material utilization, suitable for high working temperature and thermal shock resistance.
Widely used in pneumatic components, chemical industry, environmental protection and other fields. It can produce porous elements with various shapes, structures, different particle sizes and porosities according to user requirements, such as covers, caps, sheets, tubes, and rod-shaped filter elements. Therefore, stainless steel powder sintered filter material with its high-tech material composition and special molding process, so that it has a unique excellent performance:
1. High temperature resistance, normal use below 550 degrees Celsius.
2. High filtration accuracy, stable pores, can effectively remove suspended solids and particles, etc., excellent filtration accuracy and good purification effect.
3. Good air permeability and low pressure loss. High porosity, uniform pore size, low initial resistance, easy to blow back, online regeneration, easy to clean, strong regeneration ability and long service life.
4. High mechanical strength, good rigidity, good plasticity, no need for additional skeleton support protection, simple installation and use, convenient maintenance, good assembly, and can be welded, bonded and machined.
5. uniform pore, especially suitable for fluid distribution, homogenization treatment and other occasions with high uniformity requirements.
6. Filtering accuracy: 0.2 ~ 80μm.
7. No particles fall off, not to form secondary pollution of the original solution.
8. Good mechanical performance, low pressure difference, large flow rate, pressure filtration, suction filtration, simple operation.
9. Good corrosion resistance, can be used in nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium, liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide gas and other environments.
10. The forming process is good, and the overall non-welding length can reach 1200mm. Stainless steel powder products are formed at one time without cutting, the effective utilization rate of raw materials is high, and the material is greatly saved. It is especially suitable for components with large batches and complex structures.
Next Page
Next Page
Copyright:Shanghai SoluGET Filtration Technology Co., Ltd.
Shanghai SoluGET Filtration Technology Co., Ltd.
SAF Coolest v1.3.1.2 设置面板 FWVSX-AEVY-OSSQE-AFA
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page