Products

Home page

Products

High Dirt Holding Capacity Melt-blown Filter Cartridges

对比

Number:

06-01

High Dirt Holding Capacity Melt-blown Filter Cartridges

Model Number:

MB series melt-blown filter cartridges are made of polypropylene microfiber by hot melt entanglement. No chemical binder or surfactant is added in the process of manufacturing and forming. According to the filter element from inside to outside and the different precision of the filter element, the filament diameter and entanglement density of the fiber will be adjusted accordingly. In the process of hot melt bonding, the micropolypropylene fiber gradually forms a deep gradient microporous structure with sparse outside and dense inside. MB series filter cartridges have the advantages of high filtration accuracy, high dirt holding capacity and small pressure loss. 100% pure PP material, good chemical compatibility.

Quantity

Stock surplus

加入购物车

立即购买

Classification:

Melt Blown Filter Cartridges

Request for Quote

隐藏域元素占位

Overview

Features and Advantages

Specifications

Filter Cartridge Selection Chart

Performance

Features and Advantages

Depth filtration media

Pure PP material, good chemical compatibility

Optional inner support to increase structural strength

Multiple filter precision options

Specifications

Material Structure

Medium: PP

Support and drainage: PP

Working Characteristics

Max Service Temperature: 80 ℃

Max Working Pressure: 0.4MPa/21 ℃

Differential: 0.2MPa/80 ℃

Filter Cartridge Selection Chart

Model Number	Medium	Removal Ratings	Length	Inner Support	Connector	O-ring Options
MB	Polypropylene	1 = 1 μm	10 = 10 inch	M = No support,28mm	DOE = double open end	S = Silicone
		3 = 3 μm	20 = 20 inch	inner diameter	C3 = 222+flat closed end	V = Fluoroelastomer
		5 = 5 μm	30 = 30 inch	L = No support,30mm	C8 = 222+fin end	E = EPDM
		10 = 10 μm	40 = 40 inch	inner diameter	C2 = 226+flat closed end	N = NBR
		20 = 20 μm		PM = With support,	C7 = 226+fin end	T = FEP Encapsulated FKM
		30 = 30 μm		28mm inner diameter
		50 = 50 μm		PL = With support
		100 = 100 μm		30mm inner diameter
		150 = 150 μm