Products

Home page

Products

对比

Number:

06-02

Absolute Melt-blown Filter Cartridges

Model Number:

AMB

AMB series melt blown filter cartridges are made through melt blown integrated molding without any adhesive, have continuous fiber structure, high strength filter element structure. The filter elements are composed of gradual aperture structure, which can multiply the service life. The innermost layer of the filter element is the absolute accuracy filtering layer, and the aperture is uniform to ensure the stable particle removal efficiency, which can reach 99.9%. A variety of chemical resistant materials to choose from, polypropylene structural materials can be used in a variety of rot and non-corrosive liquid environment, nylon materials can be used in benzene, toluene and other strong organic corrosive environment. AMB series melt blown filter cartridges can be used in different industries, including fine chemical, biopharmaceutical, microelectronics, food and beverage, etc. It can be used in pre-filtration as well as final-filtration.

Quantity

Stock surplus

加入购物车

立即购买

Classification:

Melt Blown Filter Cartridges

Request for Quote

隐藏域元素占位

Overview

Features and Advantages

Specifications

Filter Cartridge Selection Chart

Performance

Features and Advantages

Depth filtration media

Pure PP material, good chemical compatibility

High filtration precision, food grade material

Specifications

Material Structure

Model Number	AMBPP	AMBNY
Medium	PP	NYLON
Support and drainage	PP	/

Working Characteristics

Model Number

AMBPP

AMBNY

Max Service Temperature

80 ℃

120℃

Max Working Pressure

Differential

0.4MPa/21℃
0.2MPa/80℃

0.4MPa/21℃
0.2MPa/120℃

Filter Cartridge Selection Chart

Model Number	Medium	Removal Ratings	Length	Inner Support	Connector	O-ring Options
AMB	Polypropylene	1 = 1 μm	10 = 10 inch	M = No support,28mm	DOE = double open end	S = Silicone
	Nylon	3 = 3 μm	20 = 20 inch	inner diameter	C3 = 222+flat closed end	V = Fluoroelastomer
		5 = 5 μm	30 = 30 inch	L = No support,30mm	C8 = 222+fin end	E = EPDM
		10 = 10 μm	40 = 40 inch	inner diameter	C2 = 226+flat closed end	N = NBR
		20 = 20 μm		PM = with support,	C7 = 226+fin end	T = FEP Encapsulated FKM
		30 = 30 μm		28mm inner diameter
		50 = 50 μm		PL = With support,
		100 = 100 μm		30mm inner diameter
		150 = 150 μm