Products

Home page

Products

对比

Number:

07-01

Metal Sintered Felt Filter Cartridges

Model Number:

MFF

MFF series sintered metal fiber filters are made of fine-woven stainless steel fibers, which is sintered at a high temperature under inert atmosphere. With gradient channel structure, the opening can be rate up to 90%, provide high dirt holding capacity and long service life. Deep MFF series metal sintered felt filter cartridge can remove rigid particles, it also can remove deformable gel contaminants. MFF series metal fiber felt filter is all stainless steel structure, it can withstand high pressure difference, high temperature and repeatable cleaning. Filtration accuracy of 3-100 microns, raw materials can be 304, 316, Hastelloy alloy, etc., widely used in high temperature conditions, strong solvent characteristic medium, and high viscosity polymer field.

Quantity

Stock surplus

加入购物车

立即购买

Classification:

Metal Filter Cartridges

Request for Quote

隐藏域元素占位

Overview

Features and Advantages

Specifications

Filter Cartridge Selection Chart

Performance

Features and Advantages

High temperature resistance, high pressure resistance, suitable for harsh working conditions

Resistance to various organic solvents

Washable, recycling

Suitable for high viscosity feed liquid filtration

Specifications

Material Structure

Medium: Stainless Steel Sintered Felt

Support and drainage: Stainless Steel

Core, cage, and end caps: Stainless Steel

Working Characteristics

Max Service Temperature: 400 ℃

Max Working Pressure Difference: 0.5MPa

Suggested Pressure Differential Replacement: 0.2MPa

Filter Cartridge Selection Chart

Model Number	Medium	Removal Ratings	Length	OD	Connector	O-ring Options
MFF	S = 304	3 = 3 μm	10 = 10 inch	30 = 30 mm	DOE = double open end	S = Silicone
	L = 316L	5 = 5 μm	20 = 20 inch	50 = 50 mm	C3 = 222+flat closed end	V = Fluoroelastomer
	H = Hastelloy	10 = 10 μm	30 = 30 inch	65 = 65 mm	C8 = 222+fin end	E = EPDM
		15 = 15 μm	40 = 40 inch	70 = 70 mm	C2 = 226+flat closed end	N = NBR
		20 = 20 μm			C7 = 226+fin end	T = FEP Encapsulated FKM
		30 = 30 μm			N4 = 1” NPT	Blank = Threaded
		50 = 50 μm			N6 = 1 1/2” NPT
		100 = 100 μm